Lithofin MN Builders' Clean

Description
A special product from the LITHOFIN-Range for natural and concrete stone (MN). This highly active cleaner contains the optimal combinations of different kinds of acid, rust preventing and cleaning agents.

Properties
Lithofin MN Builders' Clean dissolves and removes cement and mortar residues, efflorescences, limescale deposits, stubborn ingrained dirt, rust and rust discolourations. The yellowish discolouration which results from iron containing stones rusting is removed and largely prevented.

Technical Data
Density: approx. 1.2 g/cm³
Appearance: liquid, reddish
Odour: pleasant, fresh
pH-Value: < 1 (concentrate)
Flash Point: n.a.
Solubility in Water: complete

Field of Use
For removing cement residues from newly installed surfaces, for thoroughly cleaning used surfaces and for removing rust and rust discolourations. Lithofin MN Builders' Clean prevents rust discolourations, which occasionally appear when cleaning iron containing stones such as serrizzo, cresciano, calanca, sardo white, etc. The product is therefore particularly suitable for those stones.

Surfaces: suitable for all acid resistant natural stones such as granite, gneiss and quarzite.

Please Note: not suitable for polished and finely honed limestones (marble) and manufactured stones. Always try the product in an inconspicuous area prior to use, since especially blue and black “granites” are often damaged.

Directions for Use
First wet the surface, then apply Lithofin MN Builder’s Clean
– diluted with water up to 1:10, depending on the type of dirt
– and immediately spread the product evenly on the surface with a scrubbing brush. After a few minutes, scrub the
surface then wash away with clean water. Do not allow the product to dry on the surface. In stubborn cases this
procedure may have to be repeated.

Advice: in case of extremely stubborn, repeated rust discolourations we recommend Lithofin BERO.

Please Note: Lithofin MN Builder’s Clean is not suitable for polished or finely honed surfaces which are sensitive to
acid such as limestone, marble, manufactured stone, etc. In cases of doubt, try the product in an inconspicuous area.
Surfaces such as chrome, enamel, wood, and similar acid sensitive surface must be protected against splashes and
vapours. Acid containing cleaners can develop vapours which may damage sensitive surfaces. We highly recommend carefully washing the product off the surface and ensuring good ventilation during and after use.

Coverage
approx. 15 to 30m² depending on dirt up to 50m² on polished surfaces.

Final Treatment
Many natural stones require a protective treatment which prevents the penetration of water, oil and dirt. The LITHOFIN-Range offers suitable special products.

Storage
Closed, cool and dry. Shelf life of up to five years.

Environmental Protection
Surfactants are biologically degradable in accordance with EU-regulations. Free of phosphates. The acidic components are largely neutralised during cleaning. Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.

Safety
Contents: acids; non-ionic surfactants; auxilliary agents.
Labelling according to EG-Guideline 199/45/EG: Symbol Xi, irritant.
Risk and Safety Phrases: irritating to eyes and skin. Keep out of the reach of children. Do not breathe vapour. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label.
First Aid Procedures: in case of inhalation take in fresh air. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. Do not induce vomitting. If swallowed by mistake drink plenty of water and seek medical treatment.
Emergency Procedures: in case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general purpose binder). Ensure adequate ventilation. Product does not burn, fire-extinguishing activities according to surrounding. Additional Information is listed on the Material Safety Data Sheet.

ADR2003/GGVSE: Kennzeichnung für Transport
a, b UN1760 none, limited quantity

Packaging
a.) 1 litre bottle with child-proof cap (12 per box)
b.) 5 litre canister (4 per box)