- On sale!
- On sale!
Lithofin KF Active Clean
Made in Germany
Lithofin KF Active-Clean
A special product from the LITHOFIN-Range for ceramics, quarry tiles and porcelain (KF). Lithofin KF Active-Clean is a high-yielding concentrate based on a proven and balanced combination of active acids and high quality cleaning compounds. The product works thoroughly yet mildly, does not leave any residues and has a pleasant smell.
Lithofin KF Active-Clean removes surface residues such as calcium, lime and dirt deposits, soap scum and greasy residues, rust, etc. The surfaces will gleam without polishing and the pleasant odour emphasizes the hygienic cleanliness.
Density: 1.1 g/cm³
pH-Value: <1 (concentrate)
Appearance: clear, green
Solubility in Water: very good
Field of Use
For every-day maintenance cleaning in bathrooms, showers, toilets as well as kitchens. Lithofin KF Active-Clean is suitable for ceramic tiles, grouting, chrome, stainless steel, glass and many types of plastics. Not suitable for polished marble and limestone.
Directions for Use
Depending on the stubbornness of the dirt, dilute the product up to 1:15 and apply it to the surface with a brush or sponge. On small surfaces, simply put a small amount of Lithofin KF Active-Clean on a wet sponge. Allow the product to work briefly, then rinse well with water. In case of very stubborn dirt deposits, use the product undiluted. Always test in an inconspicuous area prior to use.
Please Note: do not use on acid sensitive surfaces such as polished marble and limestone, enamel, certain decorative tiles, etc.
Advice: in order to protect cement based grout lines, pre-wet the surface and use the product only in diluted form.
Coverage: 10 to 20m² per litre on stubborn dirt, up to 100m² when used for regular cleaning.
Keep closed and cool. Shelf life of up to five years.
The contained surfactants are biologically degradable according to EU-regulations. Free of phosphates.
Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyetylene (PE). Clean containers can be recycled through collection system.
Contents: acids; non-ionic surfactants (5 to 15%); auxiliary agents.
Risk and Safety Phrases: Labelling according to 1999/45/EG: Symbol Xi, irritant.
Irritating to eyes and skin. Keep out of the reach of children. Do not breathe vapour. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label.
First Aid Procedures: remove contaminated soaked clothing immediately. In case of inhalation, ensure immediate supply of fresh air. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomiting. If swallowed by mistake drink plenty of water and seek medical treatment.
Emergency Procedures: in case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure adequate ventilation. Product does not burn, fire-extinguishing activities according to surrounding.
Unit Label Notes on freight papers
UN1760 none, due to limited quantities
1 litre bottle with child-proof cap (12 per box)