Lithofin MN Outdoor Cleaner

Description

A special product from the LITHOFIN-Range for marble, natural and artificial stone (MN). Highly active cleaner based on chlorine compounds and special additives.

Properties

Lithofin MN Outdoor Cleaner works fast and thoroughly, without attacking the substrate. The product removes stubborn green and dark deposits caused by plants and leaves.

Technical Data:

Density: approx. 1.1 g/cm³

pH-Value: approx. 13

Appearance: liquid, clear, yellowish

Odour: pungent

Flash Point: n.a.

Solubility in Water: complete

Field of Use

For thoroughly cleaning outside surfaces made of natural and concrete stone, such as stairs, walk ways, walls, etc. Also suitable for removing dark mould stains from silicone joints.

Directions for Use

Use a garden sprayer to apply Lithofin MN Outdoor Cleaner generously in undiluted form. Allow the product to work for 2 to 10 hours depending on the stubbornness of the dirt deposits. Brush the surface and rinse with clear water. In very stubborn cases, repeat this procedure

Please Note: test the product's suitability in an inconspicuous area prior to use. Shield treated surfaces from rain for approx. 4 hours. Protect plants, textiles, metals, wood, etc. Product will damage these surfaces. Application Temperature: 10 to 25°C. Do not use on warm surfaces.

Coverage: approx. 5 to 15m² per litre

Hint: after several days, treat the surface with Lithofin ALGEX and repeat this treatment on a yearly basis. The preventive effect of Lithofin ALGEX will help to keep outdoor surfaces clean and free of green deposits

Further Treatment

Treating the stone with Lithofin STAINSTOP >W< will prevent water and dirt from penetrating into the surface, thereby reducing the tendency to absorb dirt inhibiting the growth of algae